Arming The System - Honeywell LYNX Touch User Manual

Hide thumbs Also See for LYNX Touch:
Table of Contents

Advertisement

SECURING THE PREMISES
SECURIN
SECURIN
SECURIN
G THE PREMISES
G THE PREMISES
G THE PREMISES

Arming the System

Use this mode when you are staying home, but expect someone to use the entrance door
later. Close all protected perimeter windows and doors before arming. The green READY
indicator on the control should be lit if the system is ready to be armed. When armed in
STAY mode, the system will sound an alarm if a protected door or window is opened, but you
may otherwise move freely throughout the premises. Late arrivals can enter through the
designated entrance door without causing an alarm, but they must disarm the system within
the entry delay period or an alarm will occur. If Quick Arm was programmed by the installer,
you do not need to enter the security code to arm the system. The security code must always
be used to disarm the system, however.
Ô
Ó
Ó
Ô
Ó
Ô
Ó
Ô
Ó
Ó
Ô
Ò
q
t
t
Ò
Ô
Ó
Ô
Ò
Ó
Ò
P
Ó
Ô
Ó
Ô
Ô
Ò
Ó
Ô
Ò
Ô
r
s
t
Ô
Ò
Ó
Ó
Ô
Ô
Ô
Ó
Ô
Ó
Ô
1. Select the Arm Stay icon, the system will
beep once and display a keypad.
2. Enter a valid User Code.
OR
If Quick Arm has been enabled, select the
Quick Arm
The system will beep three times and
Armed Stay Exit Now
announce
delay screen will be displayed. If
programmed the display will count down
the time remaining in the exit delay.
If a valid user code is not entered or the
Ñ
Ò
Ó
Ô
Õ
Confirm icon has not been selected within
10 seconds, the system will return to the
home
screen and it will not be armed.
r
s
– 18 –
Ó
Ô
Ô
Ó
Ô
Ö
P
Ô
icon.
. The exit
Ó
Ò
Ó
Ô
Ó
Ô

Advertisement

Table of Contents
loading

Table of Contents