Honeywell 7000 Configuration - Honeywell LYNX Touch 7000 Owner's Manual

Hide thumbs

Table of Contents

Your system can include more than one user keypad. If so, each user keypad oper-

ates in conjunction with the others and your system can be controlled from any one of

them. Messages and any user-requested operations appear the same on all user

keypads at the same time. The sounds, except for those indicating an alarm, can be

silenced on selective displays to avoid waking up other household members when

returning home late. The following is a summary of functions of the keypad:

Smart Help

Two-Line Display Messages and menu choices display to tell you what is

LEDs

Audible

Feedback

Numeric Keys

During any user keypad interaction, if you pause more than seven

seconds without hitting a key, the system assumes that help is

appropriate at that time. The user keypad provides help for the

specific function you are performing. After help is provided, the

display returns to the current function. Seven seconds later, the

cycle is repeated and the specific help message is presented two

more times. The messages are always pertinent to the area of the

system you are currently using.

happening with your system, including: system status and

location of alarms, open points, and system troubles. Additional

lines can be displayed by scrolling information two lines at a time.

Two red LEDs (lights) are located next to the arrow keys. The

LED next to the UP arrow, when lit, indicates that some special

protection is turned off or security points were bypassed. The

LED next to the DOWN arrow, when lit, indicates a point of

protection such as a window or door is open.

Each time you press any key, an audible tone sounds to confirm

successful entry of a digit or function.

Press these keys to enter passcodes and make menu selections.

Press and hold FIRE for two seconds anytime, regardless of

mode or security system status, to transmit a fire alarm to the

Customer Service Center and sound an audible alarm. The

Customer Service Center dispatches the fire department and

notifies the first available person on your Call List.

Press and hold POLICE for two seconds anytime, regardless of

mode or security system status, to transmit an alarm to the

Customer Service Center. The Customer Service Center

dispatches the police and notifies the first available person on

your Call List. POLICE can be programmed to be silent or sound

an audible alarm; however, the user keypad continues to display

POLICE ALARM.

The SPECIAL function of your system was determined at the time

of installation. When monitoring of this key is included, press and

hold SPECIAL for two seconds to transmit an alarm to the

Customer Service Center. The Customer Service Center

dispatches the pre-determined help and notifies the first available

person on your Call List. The SPECIAL key can be programmed

to be audible or silent; however, the user keypad continues to

display SPECIAL ALARM.