Routing Matrix Control - Solid State Logic XLogic Alpha-Link LIVE-R User Manual

Routing Matrix Control

The Alpha-Link LIVE-R contains a routing matrix which enables routing
of groups of signals between the inputs and outputs. This routing
matrix is controlled using two buttons – one to select an OUTPUT
and the other to pick the INPUT for that output – along with a set of
indicator LEDs to show the routing setup. Using these two buttons,
any input group (AES/EBU, Analogue or MADI) can be connected to
any output group.
All routing is performed to full 24-bit precision. There are no mixing functions in
Alpha-Link LIVE-R so whilst it is possible to use the routing matrix to route any
single input to multiple outputs, it is not possible for a single output to be fed from
more than one input (selecting a second source for an output will cause the second
source to replace the original).
The routing matrix LEDs indicate which input group(s) are feeding which output group. Each audio interface has
both input and output groups which are routed independently so routing Analogue to/from MADI for example
requires routing both Analogue In → MADI Out and MADI In → Analogue Out as two seperate steps.
6
AES/EBU
Analogue
MADI
Input Button
and Indicators
Output Button
and Indicators