Opticon RS232 User Manual page 57

Manual No. 25-ULGPMU01-01
Redundant Decoding Settings
Redundancy Settings - This is the number of times that a label must be correctly decoded before it is transmitted. Selecting a
higher redundancy count makes reading slower, but it reduces the probability of reading errors, especially when labels of poor
definition are used.
Positive and Negative Bar Codes
Positive and Negative Bar Codes - Usually bar codes are printed black on white, but sometime white on black. These labels are
called positive and negative, respectively.
Start/End
Program
ZZ
Menu
No
X0
redundancy
Two times
X1
redundant
Three times
X2
redundant
Four times
X3
redundant
Start/End
Program
ZZ
Menu
Positive
V2
bar codes
Both positive
V4
and negative
bar codes
Series LGP Handheld CCD Scanner
[[
Y1
Y2
Y3
Y!
[[
W3
W5
Page 57