Safety Precautions - HighSecLabs K208E User Manual

Safety Precautions

Please read the following safety precautions carefully before using
the product:
Before cleaning, disconnect the product from DC
power.
Be sure not to expose the product to excessive
humidity.
Be sure to install the product on a clean secure
surface.
Do not place the DC power cord in a path of foot
traffic.
If the product is not used for a long period of time,
remove the product's wall-mount power supply from
the mains jack.
If one of the following situations occurs, get the
product checked by a qualified service technician:
The product's power supply is overheated,
damaged, broken, causes smoke or shortens
the mains power socket.
Liquid penetrates the product's case.
The product is exposed to excessive moisture
or water.
The product is not working well even after
carefully following the instructions in this
user's manual.
The product has been dropped or is physically
damaged.
Secure Large KVM Switches User Manual
The product has obvious signs of breakage or
loose internal parts.
The product should be stored and used only in
temperature and humidity controlled environments
as defined in the product's environmental
specifications.
The wall-mount power supply used with this product
should be the model supplied by the manufacturer
or an approved equivalent provided by HSL or an
authorized service provider. The use of improper
power source will void product warranty.
7