Creating A Prefix And/Or Suffix - Opticon LPN5627 User Manual

Manual No. 25-ULPNR101-03; Feb, 2003
Scanner

11. Creating a Prefix and/or Suffix

Computer
Command
(Z7)
1Y
Z4
The scanner can be programmed to transmit a prefix and/or suffix with the decoded data. A Prefix (or a
Suffix) is composed of up to 4 characters. The following steps are used to establish a Prefix that will be
transmitted with the bar code data:
1. Scan Start
2. Scan the bar code representing the symbology to which you wish to add a Prefix
3. Scan the character(s) that will comprise the Prefix. Up to four numeric, alpha or control character(s)
may be used.
4. Scan "STOP" to exit the Programming Mode.
Example : To add the alpha character "A" as a Prefix and "B" as a
Suffix to UPC-A bar code data:
1. Scan "START/END Programming Mode"
2. Scan N1, representing a Prefix for UPC-A
3. Scan 0A, representing the alpha character "A"
4. Scan N6, representing a Suffix for UPC-A
5. Scan 0B, representing the alpha character "B"
6. Scan "START/END Programming Mode"
The same steps are used to establish a Suffix.
Function
/Description
START/END
Programming Menu
Clear all Prefixes
Display Prefix/Suffix
value and length (expressed in
hexidecimal format)
LPN5627 / LPR5627 Laser Fixed Mount
Bar Code
Command
-[8-
-2Z-
-[5-
Page 38