Chapter One - Introduction; Performance Characteristics; Features And Functions - Honeywell HSD-361P Operation Manual

Chapter One – Introduction

1.1 Performance Characteristics

 0～255 individually addressed units. The dome address is defined using a dip switch with 8 positions (Binary addressing
scheme).
 Integrated multi-protocol and auto protocol differentiation. Note: The dome can auto differentiate the protocol of the
controller only on power up.
 Continuous Pan 360 degree rotation.
 90 degree Tilt action plus 2 degree angle adjustment (the view angle can be 90 or 92 degrees).
 Pan speed in manual operation is variable from 0.1 up to 300 degrees per second.
 Tilt speed in manual operation is variable from 0.1 to 120 degrees per second.
 128 preset positions (A preset position is defined as a user definable setting for precise coordinates).
 The maximum speed when a preset position is called can reach 400 degrees per second with positioning accuracy of±0.1
degree.
 Input power supply: 24VAC-2Amp (outdoor).
 User friendly on screen menu interface for ease of installation.
 Environmental protection conforming to IP66 standards (outdoor model).
 RS-485 (long distance) communications mode.
 Selectable transmission speed, (i.e. Baud rate) .User definable via dip switch setting from 2400bps to 1920 bps.

1.2 Features and Functions

 Multi-language on screen menu for operation and function settings. （The camera title is user definable as well as the ability to
display or not the camera coordinates）.
 On screen Crosshair function (By enabling this option, the target can be followed more effectively using the crosshairs as a
reference point).
 Three users define PTZ tours with up to 2 minutes record duration for each tour. (User has the ability in real-time to monitor
and record the action of a manual dome operation).
Six group of programmable vector scans (including scan speed, dwell time, preset and dwell time between tours) Auto flip
function in tilt action + 10 degree positioning.
24 sectors of user programmable privacy zones (sectional mask). User can mask part of the camera sectors which differs
between different models of installed cameras.
 Eight sectors of user programmable sectional display. User can define and display the name and position of the camera,
which differs between different models of installed cameras.
 Resume automatic operation after initial self-test of the dome as well as resume automatic operation when there is no
transmission from a keyboard controller (Dwell time can be set from 1 to 999 seconds).
 Freeze frame function (snapshot function availability supported by camera).
 Resume operation function (Dome unit will return to the previous operation after the execution of an operation using the on
screen menu).
 Intelligent manual scan function (By executing this function in manual pan, you can adjust the manual pan behavior of the
dome). 1