Example: Telephone Book / Editor - Aastra 142 User Manual

Menu Control
Type
Use the arrow keys to select Play once, for example, and press
Repeat
Play once "
OK ' Esc
Toggling function
Some functions permit only two options - ON or OFF. Active (ON) functions are indicated by a
example .
Alarm
If the function is not active, the icon
—
OK softkey to toggle between settings.
Using the number keys or the arrow keys to edit settings
In the "Ringer Settings > Volume Settings" menu, for example, you can set the desired volume (e.g.,
level 4) using either the number keys or the arrow keys. Your setting will be activated when you
press OK .
22
OK . Your setting will be activated.
–
Alarm
appears, for example . You always use the
Menu Control

Example: Telephone Book / Editor

This example describes how to create a new entry in the telephone book. For information on further
telephone book options, please refer to page page 41ff.
Use the arrow key
Telephone Book
Empty
, for
New
Enter Number:
12349876_
OK {}
Enter Name:
Adm_
OK {}
to open the telephone book.
Esc
Press New . The phone number input opens.
Enter "12349876_", for example. You can correct your input by
using the arrow keys to move the cursor to a digit, which will
then flash. Press the C-key to delete the digit to the left of the
flashing character. You can then insert new digits at this point.
When you have completed your input, press
Esc
name input.
Enter the name. You enter letters by pressing the correspond-
ing key briefly a number of times. The available characters will
be displayed in the upper line. The input position moves on
automatically if you do not enter any characters for a few sec-
onds or if you enter a new character. You correct your input in
the same way as with phone number entries.
Esc
The initial letter of every word is automatically upper case. You
can toggle between upper and lower case (Display e.g.,
A –> a ) by pressing the star key or by pressing and holding
down the respective number/letter key.
OK to move to
23