Table of Contents
Advertisement
Editing Lists
Telephone Book: Editing an Entry
F
Press the arrow key
while your handset is in the idle state, and scroll to the entry
search for the name by entering the initial letter
times in quick succession).
D
Press
Options
.
F
Select one of the following menu items and confirm this by pressing
You can edit the number and the name.
Edit
Copies the phone number to predialing or to the caller filter (see page
Add To
51).
You can assign a quick call number to the entry (see page 43).
Quick Call
After a security check, the entry concerned will be deleted.
Delete
Note
You can find further information on the editor on page 24ff.
You can delete all of the telephone book entries by means of the "Reset" menu item (see page 56).
42
F
or
t
(if necessary, press the number key several
OK
.
Editing Lists
Telephone Book: Creating a Quick Call Entry
You can define important telephone book entries as quick call entries and dial these numbers by
pressing just a single key. You can create up to nine quick call entries (corresponding to the number
keys "1" to "9").
Those telephone book entries defined as quick call destinations are identified by the corresponding
quick call code number placed behind the name.
To dial a number, press the key you have allocated to that number and hold it down for a second or
two while the handset is in the idle state. The number you wish to call will then be copied to predial-
ing (see page 30). If you activate the "Auto.Quick Hook" feature in the "Telephone Options" menu,
the quick call number will be dialed immediately without being copied to predialing.
F
Press the arrow key
while your handset is in the idle state and scroll to the desired entry,
e.g.
Brown, Tom
.
D
Press
Options
.
F
Select
Quick Call
, and confirm this by pressing
>123456789<
You will see, for example,
Enter a quick call code, and confirm this by pressing
If you store additional quick call numbers, those that have already been allocated are marked with a
– sign. Quick call codes that have already been allocated can be overwritten. You delete quick call
entries by deleting the code displayed with the C key. Confirm the deletion by pressing
OK
.
in the display:
OK
.
OK
.
43
Advertisement
Table of Contents
