Remote Menu - Sony LMD-2451MT Instructions For Use Manual

Submenu Setting
HOROPTER Changes display formats in monitoring
CHECK left/right input signals. This helps to
differentiate between left and right
signals.
• NORMAL: Displays video signals.
• BLUE: Displays video signals as RGB
blue color component.
• RED: Displays video signals as RGB
red color component.
• MONO: Displays video signals as
grayscale image.
• BLACK: Displays black signals. (No
video signals)
FLIP H Changes display patterns (normal/
horizontally reversed display) in
monitoring left/right input signals.
• OFF: Deactivates the reversing
function.
• LEFT: Horizontally reverses left
signal.
• RIGHT: Horizontally reverses right
signal.
PAYLOAD ID Displays the channel assign information
of payload ID superimposed on input
signals from the IN (INPUT)-1 and IN
(INPUT)-2 connector on BKM-
250TGM. Going out of the 3D
SETTING menu renews channel assign
information.
• -: Payload ID is not superimposed on
signals.
• x: Channel assign information is
detected as Link-3 or Link-4.
• LEFT: Channel assign information is
detected as Link-1.
• RIGHT: Channel assign information
is detected as Link-2.
Payload ID is only available when
DUAL or AUTO2 is selected in 3D
SIGNAL FORMAT.
2D/3D DISPLAY Sets the on-screen indication of the
display mode currently viewed.
Selecting AUTO or ON displays "2D" or
"3D" at the top center of the screen
according to the display mode selected.
• AUTO: "2D" or "3D" is displayed for
about five seconds after switching
between the 2D and 3D display
mode.
• ON: "2D" or "3D" is always
displayed.
• OFF: The display is hidden.

REMOTE menu

REMOTE
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
M O N I T O R :
C O N N E C T I O N :
Submenu Setting
PARALLEL REMOTE Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
pins 1 to 4 and pins 6 to 8. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY G
• EXT SYNC
• BLUE ONLY
• MONO
• MIRROR IMAGE
• 2D/3D SELECT
• CHECKERBOARD
• L/R SWITCH
• HOROPTER CHECK
• DISPARITY SIM.
Note
If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 92.
SERIAL REMOTE Selects the mode to be used.
• OFF: SERIAL REMOTE does
• RS-232C: The monitor is
• ETHERNET: The monitor is
xxxxxxx
not function.
controlled by the command
of RS-232C.
controlled by the command
of Ethernet.
Adjustment Using the Menus
87