Scan Mode Image - Sony LMD-2451MT Instructions For Use Manual

DISPARITY SIM. (disparity simulation)
Press the button to change the phase of left/right signals
for 3D image display. You can monitor the depth of 3D
images using simulated 3D effect. Press the
button to adjust the phase of the selected signal(s).
Select the signal(s) you want to adjust from
DISPARITY SIM. under the 3D SETTING menu before
using this function button. Pressing the button again
stores the setting values you set. Install BKM-250TGM
to display HD-SDI signal in 3D.
Note
This function is only available when 3G-B*, DUAL,
AUTO1, or AUTO2 is selected in 3D SIGNAL
FORMAT.
* Install BKM-250TGM to display HD-SDI signal in 3D.

Scan mode image

4
4 :3
1600 × 1200
4
1600 × 1200
–
–
1080P is effective only when BKM-250TGM is installed.
+
or –
16
9
3
16: 9
1920 × 1080
16
3 9
1920 × 1080
16
9
1920 × 1200
1920 × 1080
4
–
COMPUTER DETECT
USER CONFIG COMPUTER DETECT
DV I :
H D 1 5 :
Submenu Setting
COMPUTER The appropriate preset memory is set for
DETECT the signal from DVI and HD15 input
connector. Select "PRESET1" for the
standard computer signal. Select
"PRESET2" to "PRESET8" when the
computer signal is not standard (on
page 93).
The preset memory is set for each input
connector of DVI and HD15.
Note
"PRESET7" and "PRESET8" will only
be displayed when "DVI" is selected.
OPTION DVI SETTING
* This settings are displayed only when a BKM-256DD is installed.
USER CONFIG – OPTION DVI SETTING
OPTION DVI SETTING
E X T 5 V ( I N ) :
E X T 5 V ( O U T ) :
E D I D U P D AT E :
E D I D S TAT U S :
M O D E L
S E R .
Submenu Setting
EXT 5V(IN) Selects ON to output external 5 V
power from the DVI input
connectors and OFF not to output.
16
9
3
1280 × 720
xxxxx
xxxxx
xx
xx
xxxxx
xxxx
Adjustment Using the Menus
85