Remote Menu; Key Inhibit Menu - Sony LMD-3251ST Instructions For Use Manual

REMOTE menu

Submenu Setting
PARALLEL REMOTE Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
pins 1 to 4 and pins 6 to 8. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY G
• EXT SYNC
• AUTO SYNC DETECT
• BLUE ONLY
• MONO
• MIRROR IMAGE
• 2D/3D SELECT
• CHECKERBOARD
• L/R SWITCH
• HOROPTER CHECK
• DISPARITY SIM.
Note
If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 43.
SERIAL REMOTE Selects the mode to be used.
• OFF: SERIAL REMOTE does
• RS-232C: The monitor is
• ETHERNET: The monitor is
not function.
controlled by the command
of RS-232C.
controlled by the command
of Ethernet.
Submenu Setting
MONITOR Set the monitor setting.
CONNECTION Sets the connection of the monitor
and the controller.

KEY INHIBIT menu

KEY INHIBIT
K E Y I N H I B I T :
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set to ON, all items are displayed in black,
indicating the items are locked.
MONITOR ID: Sets the ID
of the monitor.
GROUP ID: Sets the group
ID of the monitor.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
PEER TO PEER: for one
to one connection
LAN: for connection via a
network
xx
39
Adjustment Using the Menus