Lancom Public Spot Option - Lancom 1821n Wireless Manual

To install an optional AirLancer antenna, switch the device off by unplugging
the power cable. Now carefully unplug the diversity antennas from the back
by unscrewing them. Connect the AirLancer antennas to the antenna connec-
tors marked 'ANT 1' and 'ANT 3' (external antennas cannot be connected to
Antenna 2).

LANCOM 1811n
Wireless
LANCOM 1821n
Wireless
Ant 3
9.2

LANCOM Public Spot Option

Wireless Public Spots are publicly accessible areas where users can use their
own mobile computers to access a wireless network (such as a company net-
work or the Internet).

Wireless LAN technology is ideal for offering wireless Internet services to the
public in locations such as airports, railway stations, restaurants or cafes via
so-called HotSpots. The LANCOM Public Spot Option is intended for operators
of public wireless networks. It enables the easy installation and maintenance
AirLancer Extender O-D9a (5 GHz), item no. 61224
Please note the following when connecting antennas:
The configuration of the device software must agree with the actual
antenna connections.
Antenna 1
ETH4 ETH3
DC12V
ETH4 ETH3
Please note that operating a LANCOM Wireless Router with the
LANCOM Public Spot Option (also referred to as a HotSpot) can be
subject to legal regulation in your country. Before installing a
LANCOM Wireless Router, please inform yourself about any appli-
cable regulations.
LANCOM 1811n Wireless – LANCOM 1821n Wireless
Chapter 9: Options and accessories
ETH2 ETH1 WAN
USB
ETH2 ETH1
Antenna 3
USB Config(COM) ISDN S
0
Config (COM) ADSL(2+)
ISDN S
0
Reset
Ant 1
Reset
87