Lancom 1821n Wireless Manual page 33

LANCOM 1811n Wireless – LANCOM 1821n Wireless
Chapter 2: Installation
The following can be displayed for WLAN link:
Off
Green
Green
Green
Red
¸
WLAN Data Provides information about the data traffic at the internal WLAN module.
The following can be displayed for WLAN data:
Green
Red
Red
¹
Status of a VPN connection.
VPN
Off
Green
Green
Green
Green
32
No WLAN network defined or WLAN module deactiva-
ted. The WLAN module is not transmitting beacons.
At least one WLAN network is defined and WLAN
module activated. The WLAN module is transmitting
beacons.
Inverse flashing Number of flashes = number of connected WLAN stati-
ons and P2P wireless connections, followed by a pause
(default).
Alternatively, the frequency of the flashed can indicate
the received signal strength of a P2P link or the received
signal strength from an access point, to which this
device is connected in client mode.
Blinking DFS scanning or other scan procedure.
Blinking Hardware error in the WLAN module
Flickering TX data traffic.
Flickering Error in wireless LAN (TX error, e.g. transmission error
due to a poor connection)
Blinking Hardware error in the WLAN module
No VPN tunnel established
blinking connection establishment
Flashing First connection
Inverse flashing Other connections
On (perma- VPN tunnels are established
nently)