What Can Your Lancom Do - Lancom 1751 UMTS Manual

110584_LC-1751-UMTS-MANUAL-EN.book Page 13 Tuesday, February 26, 2008 5:16 PM
1.3

What can your LANCOM do?

The following table shows the properties and functions of your device
Applications
Internet Access
LAN to LAN coupling via VPN
LAN to LAN coupling via ISDN
RAS server (via VPN)
RAS server (via ISDN)
IP router
NetBIOS proxy for coupling of Microsoft peer-to-peer networks via ISDN
DHCP and DNS server (for LAN and WAN)
Advanced Routing and Forwarding (ARF networks)
N:N mapping for coupling networks using the same IP address ranges
Configuring LAN ports as additional WAN ports
Policy-based routing for policy-based selection of target routes
Load-balancing for bundling of multiple DSL channels
Backup solutions and load balancing with VRRP
By means of GPS location determination the device can compare the
actual geographical coordinates with the set values. A tolerance of a few
meters is necessary.
Prerequisites for successful GPS location verification:
A suitable GPS antenna must be connected to the AUX connector.
The GPS signal must be of sufficient strength at the location.
A SIM card for mobile telephone service is inserted and the device is
connected to a cellular network.
LANCOM 1751 UMTS
Chapter 1: Introduction
8
4 channels
13