Device Connectors - Lancom 1821n Wireless Manual

2.3.1

Device connectors

The connections and switches of the router are located on the back panel:
LANCOM 1811n
Wireless
LANCOM 1821n
Wireless
Ant 3
³
·

»
¿
LANCOM 1811n
Wireless
´
²
¶
º
LANCOM 1821n
Wireless
¾
µ
Antenna 1
ETH4 ETH3
»
DC12V
ETH4 ETH3
»
Connector for antenna 1 (LANCOM 1811n Wireless) respectively antenna
3 (LANCOM 1821n Wireless) in MIMO mode.
Connection for the included power adapter
Antenna 2 is an internal antenna that does not have an external con-
nector.
Second Ethernet socket (10/100Base-Tx) for connection to the LAN. Both
10 Mbit or 100 Mbit connections are supported. The available transfer
rate is detected automatically (autosensing).
WAN connector
USB connector (USB host)
ISDN/S port
0
Serial configuration port
ADSL port
Reset switch
Connector for antenna 3 (LANCOM 1811n Wireless) respectively antenna
1 (LANCOM 1821n Wireless) in MIMO mode.
LANCOM 1811n Wireless – LANCOM 1821n Wireless
ETH2 ETH1 WAN
¿
USB
ETH2 ETH1
´
Chapter 2: Installation
Antenna 3
USB Config(COM) ISDN S
0
´ ² ¶
¾ µ
Config (COM) ADSL(2+)
ISDN S
0
¶ ² º ¾ µ
Reset
Ant 1
Reset
33