Table of Contents
Advertisement
LANCOM 1811n Wireless – LANCOM 1821n Wireless
Chapter 2: Installation
1821+ only
1821+ only
36
ADSL – connect the ADSL interface
ADSL connector cable (transparent plugs).
ISDN – to connect the LANCOM Router to the ISDN, plug one end of the
supplied ISDN connector cable (light blue plugs) in the ISDN/S
the router and the other end into an ISDN/S
to-point mode connection.
USB port – you may optionally connect printers with USB connector to
the LANCOM and make them available to the entire network. The
LANCOM provides a print server to manage the printing jobs from the net-
work. Supported protocols are RawIP and LPR/LPD.
Futher information about configuration of the print server can be
found in the LCOS reference manual.
Configuration port – you may optionally connect the router directly to
the serial port (RS-232, V.24) of a PC. Use the cable supplied for this pur-
pose. Connect the configuration port of the LANCOM
port of the PC.
Connect to power – Connect socket
using the included power adapter.
Use the supplied power supply unit only! Using an unsuitable power
supply unit may cause damage or injury.
Operational? – After a short device self-test the Power LED will be per-
manently lit. Green LAN LEDs indicate the LAN sockets that have function-
ing connections.
Devices with integrated ADSL modems can become very warm during
operation. For these models, environmental temperatures are not to
exceed 35°C. Sufficient ventilation is of vital importance. Do not stack
the devices and do not expose them to direct sunlight.
¿
to the splitter using the supplied
multi-device mode or point-
0
²
with a free serial
³
of the unit to a power supply
´
port
of
0
Advertisement
Table of Contents
