Fuel Gauge - Toro 30383 Operator's Manual

Glow Plug Light (Orange Light)
The glow plug indicator light turns on when the ignition
switch is turned to the On position. It remains lit for 6
seconds. When the light turns off, the engine is ready
to be started.
Engine Coolant Temperature Warning
Light
This light glows and the powered attachments will stop
if the engine coolant temperature is high. If the machine
is not stopped and the coolant temperature rises another
20° F, the engine will stop.
Important: If the attachment shuts down and the
temperature warning light is on, push PTO knob
down, drive to a safe flat area, move the throttle
lever to the Slow position, move the motion control
levers into the neutral locked position, and engage
the parking brake. Allow the engine to idle for
several minutes while it cools to a safe level. Stop
the engine and check the cooling system; refer to
Checking the Cooling System in Cooling System
Maintenance.
Charge Indicator
Illuminates when the system charging circuit
malfunctions.
Oil Pressure Warning Light
The oil pressure warning light glows when the oil
pressure in the engine drops below a safe level. If low
oil pressure ever occurs, stop the engine and determine
the cause. Repair the damage before starting the engine
again.

Fuel Gauge

The fuel gauge (Figure 6) indicates the quantity of fuel
remaining in the fuel tanks.
1. Fuel gauge
Signal Light Switch
Turn the signal light switch (Figure 7) to the left to
activate the left turn signal, or right to activate the right
turn signal. When finished turning, return the switch
to the Off position.
1. Signal light switch
2. Snowthrower deflector
control switch
3. Windshield wiper switch
4. Temperature control knob
13
Figure 6
Figure 7
5. Fan control knob
6. Lights control knob
7. Cab light