Scanning By Pressing The Start Button - Epson GT-10000+ Setup Manual

Scanning by Pressing the Start Button

You can open EPSON TWAIN Pro, start scanning, and have the
scanned image sent to a certain application, simply by pressing
a
the Start button on your scanner. To use this feature, you need
to install PageManager for EPSON, or other Start button
compatible software. The following occurs:
❏ Windows 98 and 2000, or EPSON Scanner Monitor software
on an operating system other than Windows 98 and 2000,
detects when the
information to the Start button compatible application, such
as PageManager for EPSON.
❏ The Start button compatible application will automatically
open EPSON TWAIN Pro, scan the image and process it in
the way the application is designed.
Note:
❏ You need to set up the Start button compatible software before using
this feature. See Chapter 5 and the documentation that comes with
the application.
❏ The scanned image will be handled by the software to its maximum
capability. For example, using PageManager for EPSON, you can
send the scanned image to a printer to print, or convert your scanned
OCR image to text format and paste it in a word processing
application—all by simply pressing the
❏ If the scanner is connected to a PC which is running EPSON Scan
Server, the Start Button feature mentioned above is disabled. For
information on using the Start button in a networked environment,
refer to the EPSON Scan Server & EPSON TWAIN Pro Network
User's Guide.
4-22
Using Your Scanner
a
Start button is pressed and sends
a
Start button.