When you are finished scanning, reattach the document cover by
pushing straight down on the back until it clicks into place.
c
Caution:
Make sure both of the cover's notches are directly above the clips
on the scanner before pushing it down into place; otherwise damage
may occur.
Starting EPSON TWAIN Pro
There are two ways to scan; with an application that supports
TWAIN, or with the a Start button and preassigned application
software.
If you ..
❏ use an application that supports EPSON TWAIN Pro to scan,
open your application (see "Starting EPSON TWAIN Pro
through your application software" below).
❏ want to scan an image directly to your application without
opening EPSON TWAIN Pro or the TWAIN-compliant
application every time, set up the a Start button and the
application to work with (see Chapter 5, "Using the Start
Button"). Then simply press the a Start button.
4-6
Using Your Scanner