The Start Button Feature - Epson GT-10000+ Setup Manual

The Start Button Feature

The Start Button feature allows you to scan and send data to a
target application with a single push of your scanner's a Start
button. The following sections will help you set up your
PageManager for EPSON and EPSON Scanner Monitor software,
or Windows 98 and 2000 system, so you can begin to use the Start
Button feature.
Note for Windows 98 and 2000 users:
The Start Button feature is supported by Windows 98 and 2000, the
EPSON Scanner Monitor software will not be installed onto
Windows 98 and 2000. See "Setting up the Start Button Feature for
Windows 98 and 2000" on page 5-11 for instructions on setting up the
Start Button feature.
Note:
If the scanner is connected to a PC which is running EPSON Scan
Server, the Start Button feature mentioned above is disabled. For
information on using the a Start button in a networked environment,
refer to the EPSON Scan Server & EPSON TWAIN Pro Network
User's Guide.
5-2
Using the Start Button