Buttons
Button
OPERATE
RESET
a
start
1-8
Getting to Know Your Scanner
Function
Turns the scanner on and off.
Resets the scanner to its default settings after
an error. Pressing this button while scanning is
in progress stops the scanner and may cause
an error in the scanning software.
The hardware switch to execute scanning and
transfer the scanned image to assigned
application software in a stand-alone
configuration. To use this feature, you need to
setup software. See Chapter 5, "Using the Start
Button," for more details.
In a networked environment it starts the same
operation as the Scan button in EPSON TWAIN
Pro Network.