Loading Documents Manually - Epson GT-10000+ Setup Manual

❏ To automatically scan both sides of a document, choose the Double-
side setting in EPSON TWAIN Pro.
❏ Be sure the switch on lower left corner of the underside of the
Automatic Document Feeder is set with the switch towards the
circular mark, as shown below.

Loading documents manually

You can load documents manually even when the Automatic
Document Feeder is installed.
To load manually, lift the Automatic Document Feeder and place
the document on the document table. Then lower the Automatic
Document Feeder and scan the document.
Note:
❏ Opening the Automatic Document Feeder while scanning is in
progress will result in an option error and may result in a paper
feeding error.
❏ Always close the Automatic Document Feeder and the middle cover
before scanning or using the feeder.
6-8
Options