The Camera Setup Wizard* is just one of the wizards provided for installation. There is also an Internet Connection Setup Wizard, which gives step-
by-step instructions for simply configuring your new DCS-5029L and connecting it to the Internet.
Internet
You can use the wizard's step-by-step instructions to
Connection Setup
configure your camera and connect it to the Internet. Refer
Wizard:
to
"Internet Connection Setup Wizard" on page
Manual
Click to manually set up your camera's connection to your
Internet
network and/or modify the network settings. Refer to
Connection Setup:
"Network Setup" on page
Motion
You can use the wizard's step-by-step instructions to
Detection Setup
configure your camera's motion detection setings. Refer
Wizard:
to
"Motion Detection Setup Wizard" on page
Manual
Click to manually set up your camera's motion detection
Motion
settings. Refer to
Detection Setup:
*Note: To register your camera with mydlink and enable its mydlink-related features, you should use the Camera Setup Wizard for installation. Please refer