D-Link DCS-5029L User Manual page 18

Section 2 - Installation
Step 5
A confirmation request will appear with a summary of the configuration
details. Make a note of the details and click Yes to add the camera to your
account. Your setup is complete!
Note: If you experience issues registering this device with your mydlink account,
perform a hard reset by pressing and holding the reset button on the device for
10 seconds while the device is powered on.
Next you will see the mydlink Live View* for your camera. The screen will look
similar to the screenshot on the right.
Note: If you used an Ethernet connection and now want to connect your camera
to your router wirelessly, you can simply disconnect the Ethernet cable and
move the camera to the preferred location. Your router's wireless settings were
automatically transferred to the camera during Zero Configuration Setup, so no
further configuration is required.
If you are interested in learning about advanced configuration of your camera,
you can skip to "Configuration" on page 28.
*Note: If the live image is blurry, you can adjust the focus by rotating the manual
focus adjustment ring that surrounds the camera lens. If you notice a white haze
when viewing in night vision mode, the night vision light on the camera may be
reflecting off a nearby surface. Try repositioning the camera.
D-Link DCS-5029L User Manual 18