Product Setup - D-Link DCS-2103 Quick Installation Manual

Hd cube network camera

Hide thumbs Also See for DCS-2103:

Table of Contents

Available languages

PrODUCT

SETUP

CD SetuP wIZarD

aDVaNCeD SetuP (aCCeSS VIa IP aDDreSS)

to configure dcs-2103 using a static Ip, connect your dcs-2103 directly to your computer's

ethernet port using the ethernet cable provided. ensure that your computer is also set to a static Ip

of address of type 192.168.0.x. then connect the power cable on the dcs-2103. the dcs-2103

power light will display as solid red first, then shortly turn to green.

then simply open a browser window and enter the Ip address in the browser address field:

DCS-2103

SETUP wIZArD CD

the cd contains all of the instructions required to setup dcs-2103

INSErT CD

Insert the cd into the cd drive of your computer. the setup

wizard should start automatically. make sure that your internet

connection is active. (do not plug in dcs-2103 yet)

SETUP wIZArD

select your language from the list of options and follow the

steps within the wizard to complete the setup of dcs-2103

Ip addRess: http://192.168.0.20

useRname: admin

passWoRd:

Table of Contents