System - D-Link DCS-5029L User Manual

Hd pan & tilt day/night network camera
Table of Contents

Advertisement

Section 4 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local
Click Save Configuration to save the current camera configuration
Hard Drive:
to your local PC.
Load From Local
To load a previously saved configuration, click Browse... and select
Hard Drive:
your saved configuration file. Then click Load Configuration to load
the file from the local hard drive.
Restore To
Click Restore Factory Defaults to reset all settings back to the factory
Factory Defaults:
defaults. Please note that this will erase any changes you have made
to the settings of the camera.
Reboot The
Click Reboot Device to reboot the camera.
Device:
Enable Schedule
Check the box to enable a scheduled reboot, meaning the camera
Reboot:
will reboot on a specific day or days, at a specific time. Then select a
schedule by checking the boxes by the days of the week and selecting
a time from the drop-down menu. Click Save to save your schedule.
D-Link DCS-5029L User Manual

System

64
64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents