System Requirements; Setup Wizard - D-Link DCS-930L Quick Installation Manual

Wireless n home network camera

Hide thumbs Also See for DCS-930L:

Table of Contents

Available languages

SySTEM REQUIREMENTS

• Computer with Microsoft Windows

• PC with 1.3GHz or above; at least 128MB RAM

• Internet Explorer 6 or above , Firefox 3.5 or above, Safari 4 or above, Chrome 2 or above

• Existing 10/100 Ethernet-based network or 802.11n wireless network

PRODUCT SETUP

Step 1:

Connect the included Ethernet cable to the network cable connector located on the bottom panel of the

DCS-930L and attach it to the network.

Step 2:

Attach the external power supply to the DC power input connector located on the bottom panel of the

DCS-930L and connect it to your wall outlet or power strip. Power is confirmed when the green LED

Power Indicator located below the lens is lit.

Step 3:

Insert the DCS-930L Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically

start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D: represents

the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears, click Install

and follow the on-screen instructions.

Step 4:

Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to

finish setting up your camera.

DCs-930l

7, Vista

, or XP

Table of Contents