Icr And Ir - D-Link DCS-5029L User Manual

Section 4 - Configuration
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be removed for increased sensitivity in low-light environments.
(The ICR filter blocks IR light when it is inserted.)
Automatic: Click Automatic, and the Day/Night mode is set automatically. Generally,
the camera uses Day mode and switches to Night mode when needed.
Day Mode:
Day mode enables the IR Cut Filter.
Night Mode:
Night mode disables the IR Cut Filter.
Schedule Mode:
Click Schedule mode, and then set up the Day/Night mode using a
schedule. Select the starting time (From) for Day Mode, and the ending
time (To) for return to Night Mode.
IR Light Control:
Select from the options below to enable or disable the IR (infrared) light
according to your preferences. This setting provides additional controls
depending on your specific application.
Off: Click Off, and the IR light will always be off.
On: Click On, and the IR light will always be on.
Sync with ICR: Click Sync with ICR to synchronize your IR LEDs with the ICR filter. IR lights
will come on when the ICR filter is removed.
Schedule: Click Schedule, and the IR light will turn on or off according to the schedule
that you specify. Select a starting time (From) and ending time (To) from
the drop-down menu.
Click Save Settings.
D-Link DCS-5029L User Manual

ICR and IR

60 60