D-Link DCS-5029L User Manual page 45

Section 4 - Configuration
Preset Sequence:
Create a preset sequence, which will automatically move the camera's
view from one preset point to another.
To add a preset to the sequence, select it from the drop-down menu
at the bottom of the Preset Sequence window, and then click the Add
button to the right. The preset name will appear in the box below the
Preset Sequence heading. After you add the final preset, make sure
you select a Dwell time from the drop-down menu, and then click
Add. The selected Dwell time will be applied to all preset points in
the sequence.
To remove a preset from the sequence, select the preset name and click
the trash icon. You can rearrange your preset points in the sequence
by selecting a preset name, and then clicking the arrow buttons to
the right to move the preset name higher or lower in the sequence.
When you have the preset points in the preferred order, you can click
the Test button to view the preset sequence.
D-Link DCS-5029L User Manual 45 45