Product Setup - D-Link DCS-930 Quick Installation Manual

PRODUCT
SET-UP
CD set-UP WiZarD
aDVaNCeD set-UP (aCCess Via iP aDDress)
To configure DCS-930 using a static IP, connect your DCS-930 directly to your computer's ethernet
port using the ethernet cable provided. Ensure that your computer is also set to a static IP of
address of type 192.168.0.x. Then connect the power cable on the DCS-930. The DCS-930 power
light will display as solid red first, then shortly turn to green.
Then simply open a browser window and enter the IP address in the browser address field:
DCs-930
SET-UP WIZARD CD
The CD contains all of the instructions required to set-up DCS-930
INSERT CD
Insert the CD into the CD drive of your computer. The set-up
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DCS-930 yet)
SET-UP WIZARD
Select your language from the list of options and follow the
steps within the wizard to complete the set-up of DCS-930
IP ADDRESS: http://192.168.0.20
USERNAME: admin
PASSWORD:
3