Table of Contents
Advertisement
※．Usage notice
The working range of COOL
Unpack the Air Conditioner
Use two or more people to move and install the air conditioner.
Failure to do so can result in back or other injury.
Remove packaging materials
Remove and properly dispose the packaging materials. Remove tape and glue residue from surfaces before
turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers.
Wipe with warm water and dry it.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue.
These products can damage the surface of your air conditioner.
Place requirements:
Place the air conditioner on a smooth level floor that strong enough to support the unit.
•
Allow at least 12 inches (50 cm) of air space on all sides of the unit for good air ventilation.
•
12" (50 cm)
min.
Place the unit in an area where the temperature will not fall below 18℃. The coils will be covered
•
with frost at temperatures below 18℃, and this may reduce performance.
NOTE: The portable air conditioner has wheels for easy movement, but it should only be rolled on smooth and
flat surfaces. Do not attempt to roll the portable air conditioner on carpet or over objects.
OPERATING METHODS
ｍｏｄｅ ａｎｄ ＤＲＹ ｍｏｄｅ：
WARNING
Excessive Weight Hazard
－5 －
16℃－30℃．
12" (50 cm)
min.
Advertisement
Table of Contents
