Table of Contents
Advertisement
※．Functions of displayer and panel
Functions of buttons on control panel:
OPERATION METHOD
This unit contains memory function. When power outage occur during
operation, the unit stops running. After electrified, the unit would still
operates with the operation mode before power outage.
1. ON/OFF
Turn on or off the unit (press once to turn on, and repress to turn off).
2. MODE
It can make modes(functions) of this unit change in cycle for user to
select proper function. Function changes on this mode is: Auto
Dry
Fan
→
3. Fan speed selection button--FAN
When unit is running in FAN, COOL, or HEAT, there are 3 speeds for
options. Press FAN serially can change fan speed in order of:
LOW
MID
HIGH.
→
→
4. Temperature setting button--TEMP
When turning on the unit, under cooling or heating mode, set temp.
value would be displayed on control panel. Press
or decrease set temp. value.
5. TIMER
Press
and
to set timer time to enable the unit turn on and off in set
＋
－
time. Timer off time can be set when unit is running, and timer on time
can be set when unit is off (but not power outage). Timer can be set in
range of 0.5-24 hours, and press
6. SLEEP
When unit is running, press this button once to begin SLEEP, repress to
quit from SLEEP state. There is no SLEEP state under AUTO mode.
－9－
and
＋
and
to adjust.
＋
－
Cool
→
→
to increase
－
Advertisement
Table of Contents
