Table of Contents
Advertisement
HEAT MODE OPERATION
HIGH
TIME
AM
SEND
DRY
Hr
Min
ON/OFF
HEAT
The compressor and lower motor stop running,
only PTC is running, the upper motor is running
at the set fan speed.
NOTE: When using Fahrenheit remote controller
c
c
the sign '
', '+
O
' or '-
O
O
O
changed to '
F','+
F' or '-
c
O
'will be corresponding
O
F'.
(only for cooling/heating type units)
1. After inserting the batteries, press
"ON/OFF" key to start the unit.
2. Press "MODE" key, to choose "HEAT"
mode.
3. Press "TEMP" key, to set the desired
temp.
4. Press "FAN" key, to set fan speed.
5. Press "SEND" key to transmit the
operation to the unit.
● When the air conditioner was disturbed, the
remote controller can't work once in a while,
only to pull out the power plug, after reinserting
it, it can be operated.
● Check if the voltage of the batteries is full or
not, otherwise to replace the worn batteries.
● When the LCD of the remote controller
couldn't display all set contents clearly, or
the set options couldn't be received, please
replace the batteries.
－14 －
Advertisement
Table of Contents
