Sinclair AMC-14Aa MOBILE SERIES User Manual page 13

※．Functions of displayer and panel
COOLING
DEHUMIDIFYING
FAN
AUTO
HEATING
OPERATION METHOD
1). Press MODE to select COOL mode.
2). Press TEMP to set proper indoor temperature in range of 16
3). Press FAN to set proper fan speed, HI / MD / LO.
When cooling, for improve cooling effect, please note:
When there is sunshine from window, please draw curtain to shield.
①
Try not to use other heat source in the room.
②
Close windows and doors can get a better dehumidify effect:
Press MODE and select DRY, then unit runs in dehumifidy mode. At this
time, upper fan motor runs in low speed and is unadjustable.
When the unit is used as dehumidifier, heat exhaust pipe is unnecessary.
1). Press MODE to select FAN mode.
2). Press FAN to select fan speed at HI, MD and LOW.
Press MODE to select AUTO, then mode microcomputer would select FAN,
COOL,HEAT and DEHUMIDIFY automatically according to indoor ambient
to offer a temperature constanting effect in the room.
Press MODE to select HEAT. At this time, compressor and lower fan stop
running with only electric heater works. Upper fan runs in set speed.
－10－
-30 .
℃ ℃