Selecting The Number Of Speaker Channels - Onkyo L-DR7 Instruction Manual

Selecting the Number of Speaker Channels

You need to configure the speaker system that you have connected to the SPEAKERS connec-
tors on the rear panel of the SWA-155X (see page 30.)
Notes
• You cannot configure the speaker channels if headphones are connected to the unit (see
page 47).
• Once you configure the speaker channels, you will not have to adjust the parameters until you
change the speaker configuration.
TV/ SETUP TV/ SETUP
5 ch
(Left/right front, center, and left/
right surround speakers)
2 ch
(Left/right front speakers)
3 ch
(Left/right front and center
4 ch
(Left/right front, and left/right
surround speakers)
SP SETUP
LAST M
1
SP SETUP
speakers)
MODE
ON
RECEIVER TV/ SETUP TV/ SETUP
STANDBY
INPUT SELECTOR
LAST M COND.M FUNC.M
1 2
SP SETUP TEST TONE CH SEL
AUDIO ANGLE SUBTITLE
4 5
DISTANCE DISTANCE UP UP
LATE NIGHT T - D/ ST SURROUND
7 7 8 8
T - D SETUP
DOWN DOWN
RANDOM
+ 10
0
SHIFT
--/---
Press TV/SETUP, then press SP SETUP
repeatedly to select the number of
channels for the SPEAKERS system.
Press SP SETUP repeatedly within three sec-
onds to change the number of channels as
shown in the diagram on the left. (The corre-
sponding speaker configuration is described in
parentheses.)
• The unit displays the previous screen in three
seconds.
• The default setting is 5 ch.
TV/SETUP
ACOUSTIC
CONTROL
SEARCH
3
PROGRAM
6
CLEAR
9 9
TIMER
41