Adjusting The Picture Quality - Onkyo L-DR7 Instruction Manual

Customizing the Function Settings

Adjusting the picture quality

Depending on discs and the TV/monitor, you may not see the result of these adjustments clearly.
Creating your own quality setting
1
2
• If you have selected [Interlace] for [Component
Video], [Interlace Video Memory Select] is avail-
able. If you have selected [Progressive] for [Compo-
nent Video], [Progressive Video Memory Select] is
available.
3
Fine Focus
Contrast
min
Sharpness
soft
Chroma Level min
Hue
green
Memory
[Interlace] mode
Fine Focus
Switch [On] to reveal greater detail (higher resolu-
tion) in the picture.
Contrast
Adjusts the contrast of the elements in the picture.
Sharpness
Adjusts the sharpness of the mid-frequency (less
detailed) elements in the picture. (This setting is
only effective when [Fine Focus] is [On].)
Chroma Level
Adjusts the color saturation level.
Hue
Adjusts the overall color balance between red and
green. (This is effective only when the PDR-155 is
connected via the VIDEO OUT or S VIDEO OUT
jacks.)
On Off
max
fine
max
red
Off 1 2 3
Press to select [Video2]
/ / /
[Video Adjust]
ENTER.
The quality adjustment window appears.
Press to select [Interlace Video
/
Memory Select], then press ENTER.
Fine Focus
Move
Press to select the desired item to
/
adjust, then press DISPLAY to display
the parameter list of the selected item.
Press DISPLAY again to display the pre-
vious window.
DNR
Sharpness
Detail
Chroma Delay
Gamma
Prog. Memory
[Progressive] or [Auto Progressive] mode
DNR
Adjusts the amount of signal noise in the lumi-
nance component of the video signal.
Sharpness
Adjusts the sharpness of the mid-frequency (less
detailed) elements in the picture.
Detail
Reveals greater detail (higher resolution) in the pic-
ture.
Chroma Delay
Adjusts luminance (Y) and color (C).
Gamma
Adjusts the brightness of the darker images in the
picture.
[Start], then press
Off Off
Select DISPLAY Check
ENTER
off max
soft fine
min max
min max
green red
Off 1 2 3
105