Using The Timer Functions; Using Sleep Timer - Onkyo L-DR7 Instruction Manual

Using the Timer Functions

Using Sleep Timer

• At the specified time, the PDR-155 enters Standby mode.
• If Sleep Timer is enabled during timer playback or record-
ing, the unit enters Standby mode at the time specified.
Press SLEEP on the remote controller repeatedly to specify the time required
until the unit enters Standby mode.
SLEEP
Checking the remaining time
If you press SLEEP while the Sleep Timer is active, the unit displays the time remaining until
the unit enters Standby mode.
If you press SLEEP while the unit displays 10 minutes or less of remaining time, the Sleep
Timer will be cancelled.
Canceling Sleep Timer
Press SLEEP repeatedly until the unit displays "SLEEP OFF," or place the unit in Standby
mode, then turn the unit on again.
Note
• If the specified time for the Sleep Timer expires during "CD dubbing," the unit enters
Standby mode after "CD dubbing" is complete.
The unit displays "SLEEP 90," which means the unit will
enter Standby mode in 90 minutes.
Each press of the button shortens the time duration by 10
minutes.
• The SLEEP indicator lights up while the Sleep Timer is
activated.
+ +
TOP MENU
TV VOL TV VOL
TV TV
POWER POWER
TV CH - TV CH -
RETURN
TV VOL - TV VOL -
TV MUTING TV MUTING
REPEAT A-B
TUNING TUNER PRESET
MODE MD / CDR / TAPE
SLEEP DIMMER DISPLAY
SLEEP
MUTING VOLUME
MENU
TV TV
INPUT INPUT
+ +
TV CH TV CH
DVD
SETUP
STEP/ SLOW
CLOCK
89