Customizing the Function Settings
Recalling the settings from Function memory
1
SHIFT
2
3
Restoring the PDR-155's factory default settings
You can restore the factory default settings for DVDs.
1
2
STANDBY / ON
Note
This procedure will erase all settings in Program memory (page 60), Last memory (page 65),
Condition memory (page 66), and the Setup items. Before you proceed, make sure you really
want to do this.
118
Make sure that the Setup window is not
FUNC.M
displayed, press SHIFT, then press
3
FUNC.M within 10 seconds.
Only the memorized items are displayed.
Press
Press ENTER.
Place the PDR-155 in Standby mode.
While pressing and holding down
the front panel, press STANDBY/ON to
turn on the unit.
All Setup items are reset to the factory default
settings.
to select the desired item.
/
on