Onkyo L-DR7 Instruction Manual page 98

Recording
Other recording
This section explains how to record on a Onkyo recorder that does not have a CD DUBBING but-
ton or another manufacturer's recorder. Refer to your recorder's instruction manual for information
on recording.
STEREO
T - D
STANDBY / ON
PHONES
The remote controller buttons used in the following steps are illustrated inside a gray rectangle
( ).
1
INPUT
PDR-155
2
Prepare the recording component.
• Place the recording component in record standby mode.
• Adjust the recording level on the recording component.
• Refer to your recorder's instruction manual for information on signal-synchronized
recording (i.e., synchronized recording using input signal detection), or information on
recording via its analog inputs.
3
Start recording.
Start playing the source component selected in Step 1.
Notes
• For digital recording, you need to connect the digital output of the source component
to the digital input of the recording component.
• Do not change the input selection during recording. Otherwise, the recording cannot
be made correctly.
• To record analog signals, set surround mode to STEREO. Otherwise, you cannot
record.
98
PROGRESSIVE T - D
DV D AV CONTROLLER SCAN
MASTER VOLUME
SURROUND PRESET
MODE MEMORY INPUT
ACOUSTIC
CONTROL
STANDBY
TUNING / PRESET
INPUT SELECTOR
Remote controller
MUTING
1
PDR - 15 5
Press INPUT
INPUT SELECTOR on the remote controller
to select the recording source component.
MODE
ON
RECEIVER TV/ SETUP TV/ SETUP
ACOUSTIC
STANDBY
CONTROL
INPUT SELECTOR
1
SEARCH
LAST M COND.M FUNC.M
1 2 3
SP SETUP TEST TONE CH SEL
PROGRAM
AUDIO ANGLE SUBTITLE
4 5 6
DISTANCE DISTANCE UP UP
CLEAR
LATE NIGHT T - D/ ST SURROUND
7 7 8 8 9 9
T - D SETUP DOWN DOWN
TIMER
RANDOM
+ 10 0
SHIFT
--/---
+ +
TOP MENU TV VOL TV VOL MENU
TV TV TV TV
POWER POWER INPUT INPUT
+ +
TV CH - TV CH -
TV CH TV CH
DVD
RETURN SETUP
TV VOL - TV VOL -
TV MUTING TV MUTING
or on the PDR-155 or