Customizing the Function Settings
Settings in the Video 1 page
Refer to page 99 for more information on using the Setup window.
Selecting the aspect ratio according to the TV ([TV Screen])
Language General
Video1
V2
TV Screen
Select your display preference
Move
4 : 3 (Letter Box)
Tip
Some discs may not allow you to change the aspect ratio setting. For more information, check the
disc jacket.
Setting the component video output
Compared to a standard interlaced TV picture, a progressive scan TV is capable of more sta-
ble, flicker-free images. Don't set this parameter if your NTSC color TV or monitor doesn't
support progressive scan.
Language General
Video1
V2
TV Screen
—
Component Video
Select Interlace or Progressive
output Component Video
Move
Tip
If [Auto Progressive] is selected, the picture may flicker or be distorted when the unit switches
between progressive and interlace modes. This is not a malfunction of either the PDR-155 or the TV.
If your TV does not switch between 4:3 and 16:9, change the aspect ratio of the TV to 4:3. Alter-
natively, set [Component Video] in the Setup window to [Interlace] or [Auto Progressive]. If you
select [Auto Progressive], 4:3 discs will be played in Interlace mode, while discs that are recorded in
both 4:3 and 16:9 will play in interlace mode during the 4:3 sections, and in progressive mode during
the 16:9 parts. Switch your TV's aspect ratio to the most suitable setting (for more details, see the
manual that came with your TV).
Notes
• If you connect a TV that is not compatible with a progressive scan signal and you choose
progressive scan mode, you will not be able to see any picture at all. If your TV is con-
nected via the composite or S video connectors, choose [Interlace] for [Component Video].
• This function only works with NTSC format DVDs.
102
Set the aspect ratio to match the TV connected to the PDR-
155. If the TV has a wide screen, select [16:9 (Wide)]. Many
4:3(Letter Box)
4:3(Pan&Scan)
DVD movies support the wide screen format, and are
16:9(Wide)
recorded with an aspect ratio of 16:9. If you view such DVD
movies on a regular TV screen (which has an aspect ratio of
4:3), the image will appear vertically stretched. To avoid this,
if you are watching a regular TV screen, select [4:3 (Letter
SETUP
Exit
Box)] or [4:3 (Pan & Scan)]. You cannot change this setting
during playback.
4 : 3 (Pan & Scan)
For letter box
format movies
on a regular
TV screen
Interlace (Factory Setting)
Use this setting with regular TVs that do not feature progressive scan.
16:9(Wide)
Interlace
Progressive
Progressive
Use this setting with TVs and monitors that feature progressive
Auto Progressive
scan component video inputs.
Auto Progressive
The unit selects the progressive scan setting when 16:9 DVDs
SETUP
Exit
are played, and selects the interlace setting when 4:3 DVDs are
played. Your TV/monitor must be compatible with progressive
scan to use this setting.
16 : 9 (Wide)
For pan &
scan format
movies on a
regular TV
screen
For wide-
screen
TVs