Rear Panel - Onkyo L-DR7 Instruction Manual

Index to Parts and Controls

Rear panel

MD/TAPE IN/OUT jacks
Connect these jacks to the MD
recorder or tape deck's audio input/
output jacks, using optional audio
pin cables.
TV/LINE IN jacks
Connect these jacks to the TV's
audio output jacks, using the
included audio video pin cable.
S VIDEO output jack
S video signal is output from this
jack. Connect this to the TV's S
video jack, using the included S
video cable.
FM antenna connector
Connect the included FM
indoor antenna or FM
outdoor antenna here.
VIDEO output jack
Video signal is output from this
jack. Connect this jack to a TV,
using the included audio/video
connection cable.
AM antenna con-
nector
Connect the
included AM indoor
antenna or AM out-
door antenna here.
COMPONENT jacks
Video signal is output from
these jacks. Connect these
jacks to the TV's component
jacks.
CDR/VIDEO IN/OUT jacks
Connect these jacks to the CD
recorder or video deck's audio
input and output jacks, using
optional audio pin cables.
MULTI CH OUTPUT jacks
Use the included multi-splitter cable to
connect these jacks to the SWA-155X
(subwoofer) MULTI CH INPUT jacks.
SUBWOOFER CONTROL jack
Connect this jack to the SWA-155X (sub-
woofer) SUBWOOFER CONTROL jack,
using the included multi-splitter cable.
jack
Connect this jack to an
Onkyo component that
has an
and control them
together.
Connecting only the
cable does not link
the system completely.
You will also need to
connect audio pin
cables.
AC INLET
Connect the included power
cable here.
DIGITAL IN/OUT jacks (OPTICAL)
Connect these jacks to the MD
recorder or CD recorder's digital IN
jacks, using an optional optical digi-
tal audio cable.
Do not connect a component to both
IN and OUT jacks at the same time.
jack to link
21