Onkyo L-DR7 Instruction Manual page 17

Supplied Accessories
Using the included cork spacers and installation brackets
• Cork spacer for the subwoofer (SWA-155X)
• Cork spacers for the speakers (D-M7, D-M3)
(The illustrations below indicate the D-M7 speaker.)
We recommend that you use the included cork spacers so you can enjoy superior sound.
The cork spacers also prevent the speakers from slipping.
Positioning vertically
Mounting on a wall
Installation
screw
Caution:
Before you mount the speakers on a wall, check the strength of the wall. The supporting strength
of the screws varies depending on the wall material and the position of the studs. Use screws as
thick and long as possible, with a head diameter of 10 mm or less and a thread diameter of 4 mm
or less. (We recommend that you consult a professional home electronics installer.)
Cork spacer
Bottom of SWA-155X
Cork spacer
Bottom of D-M7
Bottom of D-M7
Installation bracket
Top of D-M7
We recommend that you use the
included cork spacers so you can
enjoy superior sound.
The cork spacers also prevent the
subwoofer from slipping.
Positioning horizontally
Wall-mount the
down. Layer two spacers and attach
them to two locations. The plaques
rotate so that you can position the
speakers upside down.
Attaching the brackets:
Use the included screws to attach the
brackets to the back of the speakers.
Side of D-M7
speakers upside
17