Using The Mid-Size Weight - Toro 30070 Operator's Manual

Commercial walk-behind mower 16hp, t-bar, gear drive with 91cm turbo force cutting unit
Hide thumbs Also See for 30070:
Table of Contents

Advertisement

Figure 19
Position C
This is the full open position. The suggested use for this
position is as follows (Figure 20).
Use in tall, dense grass mowing conditions.
Use in wet conditions.
Lowers the engine power consumption.
Allows increased ground speed in heavy conditions.
Figure 20

Using the Mid-Size Weight

Any rear weight must be removed when a Tru–Track
Sulky is installed.
®
When a Tru–Track
Sulky is installed front weights are
needed. Contact an Authorized Service Dealer for the
correct quantity of weights and placement.
WARNING
The front end of the machine can rapidly rise up
when the mower is removed. This could cause
serious injury to you or bystanders.
Support the rear of the machine when removing the
mower form the carrier frame.
G012678
G012679
®
20

Advertisement

Table of Contents
loading

Table of Contents