Table of Contents
Advertisement
•
Use low throttle settings when engaging the
traction-clutch, especially in high gears. Reduce speed
on slopes and in sharp turns to prevent overturning or
loss of control.
•
Stop the blade if the lawn mower has to be tilted for
transportation when crossing surfaces other than grass
and when transporting the lawn mower to and from the
area to be mowed.
•
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
•
Stop the engine
– whenever you leave the lawn mower.
– before refueling.
– before removing the grass catcher.
– before making height adjustment unless adjustment
can be made from the operator's position.
•
Stop the engine and disconnect the spark-plug wire or
turn off and remove the key.
– before clearing blockages or unclogging chute.
– before checking, cleaning or working on the lawn
mower.
– after striking a foreign object, inspect the lawn mower
for damage and make repairs before restarting and
operating the lawn mower.
– if lawn mower starts to vibrate abnormally (check
immediately).
•
Use care when using sulkies, and
– use only approved drawbar hitch points.
– limit loads to those you can safely control.
– do not turn sharply: use care when reversing.
– do not carry passengers.
•
Watch out for traffic when crossing or near roadways.
•
Before leaving the operator's position
– disengage the power take-off and lower the
attachments.
– change into neutral and set the parking brake.
– stop the engine and remove the key.
Maintenance and Storage
•
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
•
Do not use pressure cleaning equipment on machine.
•
Never store the equipment with gasoline in the tank and
inside a building where fumes can reach an open flame
or spark.
•
Allow the engine to cool before storing in any enclosure.
•
To reduce the fire hazard, keep the engine, silencer,
battery compartment and gasoline storage are free of
grass, leaves, or excessive grease.
•
Check grass catcher components and the discharge guard
frequently and replace with manufacturer's recommended
parts, when necessary.
•
Replace worn or damaged parts for safety.
•
Replace faulty silencers.
•
If the fuel tank has to be drained, do this out-doors.
•
Do not change the engine governor settings or overspeed
the engine. Operating an engine at excessive speed can
increase the hazard of personal injury.
•
On multibladed lawn mowers, take care as rotating one
blade may cause others to rotate.
•
Be careful during adjustment of the lawn mower to
prevent entrapment of the fingers between moving blades
and fixed parts of the lawn mower.
•
To ensure the best performance and safety,
purchase only genuine Toro replacement parts and
accessories. Do not use will fit parts and accessories;
they may cause a safety hazard.
Toro Mower Safety
The following list contains safety information specific to Toro
products and other safety information you must know.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
This product is designed for cutting and recycling grass or,
when equipped with a grass bagger, for catching cut grass.
Any use for purposes other than these could prove dangerous
to user and bystanders.
Slope Operation
All slopes and ramps require extra caution. If you feel uneasy
on a slope, do not mow it.
•
Remove obstacles such as rocks, tree limbs, etc. from the
mowing area.
•
Watch for holes, ruts or bumps. Tall grass can hide
obstacles.
•
Use caution near drop-offs, ditches, or embankments.
The machine could suddenly turn over if a wheel goes
over the edge of a cliff or ditch, or if an edge caves in.
•
Use extra care with grass catchers or other attachments.
These can change the stability of the machine.
•
Keep all movement on slopes slow and gradual. Do not
make sudden changes in speed or direction.
•
Mow slopes side to side.
•
Do not mow slopes greater than 20 degrees.
Sound Pressure
This unit has a sound pressure level at the operator's ear of 88
dBA, which includes an Uncertainty Value (K) of 1 dBA.
5
Advertisement
Table of Contents
