Table of Contents
Advertisement
Lubrication
Greasing the Machine
Grease the machine more often in dirty or dusty
conditions.
Grease Type: No. 2 lithium or molybdenum grease
1.
Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Clean the grease fittings with a rag.
Note:
Scrape any paint off the front of the
fitting(s).
4.
Pump grease into the fittings until grease begins
to ooze out of the bearings.
5.
Wipe up any excess grease.
Lubricating the Caster and
Wheel Bearings
1.
Lubricate the front wheel bearings and front
spindles
(Figure
2.
Lubricate the drive-wheel bearings
Figure 20
20).
(Figure
Greasing the Transmission
Couplers
Lubricate the transmission couplers and idler-arm
pivots located at the rear of the machine
Greasing the Mower Belt
Idler
Grease the fitting on the mower belt idler arm pivot
(Figure
22).
Note:
Remove the mower deck cover to access the
grease fitting for the mower belt idler arm.
20).
g001457
26
(Figure
Figure 21
Figure 22
21).
g001458
g001781
Advertisement
Table of Contents
