Product Overview; Controls - Toro 30070 Operator's Manual

Product Overview

3
2
1
7
1. Side discharge chute
2. Mower deck
3. Recoil starter
4. Gas tank

Controls

Become familiar with all the controls (Figure 5) before you
start the engine and operate the machine.
5
4
G015747
Figure 4
5. Controls
6. Handle
7. Caster wheel
6
1. Gear shift lever
2. Power take off switch
(PTO)
3. Choke control
4. Lower handle
5. Lower control bar
6. Parking brake
lever-released position
Throttle Control
The throttle control has two positions: Fast and Slow.
Choke
Use the choke to start a cold engine.
Blade Control Bail
The bail is used in conjunction with the power take off switch
(PTO) to engage the clutch to drive the mower blades. Release
the mower control bail to disengage the mower blades.
Power Take Off Switch (PTO)
This pull switch is used in conjunction with the blade control
bail to engage the clutch to drive the mower blades.
Gear Shift Lever
The transmission has five forward speeds, neutral and reverse,
and has an in-line shift pattern.
Important: Do not shift while unit is moving, as
transmission damage may occur.
Upper Control Bar
Shift to the desired gear and push forward on the upper
control bar to engage forward traction operation and pull
11
Figure 5
7. Blade control bail
8. Upper control bar
9. Upper handle
10. Throttle control
11. Ignition switch
12. Fuel shut-off valve