Advertisement
UNFOLDING:
ROWER-405
Figure D
Figure E
1. Disassemble the knob (50) until
the taper is completely
withdrawn from the sliding rail
join (73)
2. Then draw the know down till it
cannot be moved. At the same
time lower the sliding rail join
(73) to an angle until you can
release the knob (50). As
shown in Figure D
3. When the sliding rail join (70)
rotates on the floor, the knob
(50) will automatically fit into
the next available hole on the
sliding rail join (73). Then
fasten the knob, as shown in
Figure E
12
Advertisement
