Setting The First Printing Line (Tof) - Printek FP5000 series User Manual

User guide
Setting the first printing
line (TOF)
Adjust Paperway
Form Char
1 2 3 4
TOF
Head Tear
1 2 3 4
B
A
FormAdj= 12/72"*
Set < > Exit
3
1 2 4
You can use the TOF function for setting the position of the first print-
ing line for each paper source and each menu individually.
Before using the TOF function, you should first set the tear
position; see
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Online
Setup
Press the TOF (3) key.
Online
Setup
Press the < (2) or > (3) key to move the first printing line to the de-
sired position. You can set values from 0 to 220/72" for fanfold pa-
Online
per.
Confirm the input by pressing the Set (1) key. Press the Setup key.
Setup
The printer returns to the initial status.
The selection made will be retained after switching off the
printer.
Setting the tear position (page
The paper is fed to the position where the bot-
tom edge of the first printing line A is aligned
with the tear edge B of the printer. The factory
setting for the first printing position (TOF) is
12/ 72" (4,23 mm/1/6 inch). This is equivalent to
the second line from the top.
Settings
46).
47