Printing Setup Information; Parking The Formspro 4503 Tractors For Shipment - Printek FormsPro 4300 Operation Manual

Serial matrix printers
Hide thumbs Also See for FormsPro 4300:
Table of Contents

Advertisement

Using Special Features

PRINTING SETUP INFORMATION

Part or all of the setup configuration information may be printed. To do so, turn off the
power switch on the side of the printer, then press and hold the SETUP button while you turn
the power switch back on. The printer will display the message "Print SETUP?". Continuing
to hold the SETUP button will cause the printer to print a list of options installed, certain
hardware adjustment values, the firmware versions, and all values set for the currently
selected form. If you are still holding the SETUP button, the printer will display "Print All
Forms?". Continuing to hold the SETUP button will cause the printer to print the setup
values for all ten forms. Once this begins to print, you may release the SETUP button.
This information may prove to be helpful if forms or interface settings are accidentally
changed. This information can also be helpful if you need to call your dealer, distributor, or
Printek Technical Support or Customer Service for assistance or repair.
PARKING THE FORMSPRO 4503 TRACTORS FOR
SHIPMENT
In the event the printer ever needs to be shipped, the tractors should be "parked" toward the
front of the unit. To accomplish this, first remove the forms from all three tractor paths.
Then turn off the power switch on the side of the printer. Now press and hold the UNLOAD
button while you turn the power switch back on. Continue to hold the UNLOAD button until
the message "Park Shuttle ..." is displayed. After the shuttle stops moving and the park
shuttle message is no longer displayed, turn off the power switch and prepare the unit for
shipping.
Page 4-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents